Omega 4000: Parts and Operation
Parts of Omega 4000 Juicer
- Plunger
- Cover
- Clutch Nut
- Blade
- Strainer Basket
- Bowl
- Base Housing
- Pulp Receptacle
Specs
- 1/3 Horsepower motor
- 5200 RPM
- Noiseless 120 volts – 50/60hz – 300w – 3.8 amps
- Underwriters Laboratories & Canadian Standards Association Listed
Juicing Tips
Before you begin juicing, ensure that Omega juicer 4000 is running at the full speed. While juicing, do not force the produce through the chute. A slow and steady push will be most effective. Cut fruits whose dimensions are more than the feeding chute. Otherwise you can insert whole fruits. When you are making a combination juice, alter the frits every time you juice. Like carrots can be followed by apples and then carrots and so on and so forth. While juicing vegetables roll the produce into size of a golf ball. Wash the produce properly before juicing. You can use a vegetable cleaning brush for this purpose. For juicing soft fruits alter with it with firmer once. You will have great experience in juicing with Omega 4000 juicer by applying these useful tips.
Operation and Cleaning
Omega Juicer 4000 is easy to assemble. It doesn’t have any washer, nuts or screws to attach the parts as a result there is no risk of losing them. The blade and basket assembly is held together by a large wing nut that can be tightened with hands. The cantilever latch arms use to secure the top over the bowl is first of its kind. This type of latch make the juicer fit for daily use.
You can begin the assembly of Omega 4000 Juicer by placing the pulp collector at the back of the unit. Now place the bowl on the motor base housing at the middle of the two raised projections. Remember the spout should be positioned so that it faces you. Now place the coupling with the groove at the middle and align it properly with the spout. Place the strainer on the bowl now. Insert the cutter blade on the strainer basket with teeth up. Tighten with the large nut. Now put the cover along with the feeding chute. Secure the cover with latch arms. Insert the plunger in the chute. The juicer is ready to be used now.
Dissembling Omega 4000 is also breeze. Take out the plunger. Remove the cover by unfastening the latch arms. Now detach the blade and basket assembly by loosening the wing nut. You can clean the parts with water and mild detergent. Wipe the motor housing with moist cloth.